Sale!

WINDMILL 600W (12V / 24V) (50A / 25A) Wind Turbine Generator kit. MPPT charge controller included (Amp, Volt & Watt display) + automatic and manual braking system. DIY installation.

✅ FEATURES: Integrated automatic braking system to protect from sudden and high wind speed. Easy DIY installation methods with all materials provided. Can be used in conjunction with solar panels. MPPT Maximum power point tracking built into the wind turbine generator. Made with high quality Polypropylene and Glass Fiber material with a weather resistant seal.
✅ PROTECTION AGAINST: UV protection coating, Sudden voltage surge and wind gust, high wind speeds with integrated automatic braking system + manual braking switch and over charging of battery.
✅ SPECIFICATION: Rated power: 600W, Rated speed: 31 MPH, Voltage system: 12V & 24V auto-detect, Cut-in wind speed: 4.5 MPH, Suggested battery capacity: 100A or larger, Number of blades: 3, Rotor diameter: 4.3 ft and Weight: 26 lb.

WindMill 600W Wind Turbine

The 600W wind turbine is our mid power level wind turbine, made particularly for off-grid residential use in mind. Its DIY set-up instructions and with the entire materials wanted equipped for, it is possible for you to to set the wind turbine up very quickly at all. The 600W wind turbine is durable, low upkeep and probably the most tough wind turbine in our line up of wind turbine having weighing at simplest 26 lbs. Coated with special top weather tolerant protection spray to offer protection to the wind turbine from the weather such as rain. This is a totally self-sustaining stand-on my own device so as to steadily generates one hundred% clean GREEN renewable energy, with out you being present or around it.

The included Digital MPPT Charge Controller of the 600W wind turbine is specially configured to generate the MAX power output and to incoporate its safey protocols such as automatic braking and over charging the batteries.

SPECIFICATION:

  • Rated power: 600W
  • Rated speed: 31 ft/s
  • Voltage system: 12V & 24V (Auto detect)
  • Cut-in wind speed: 4.5 mph
  • Suggested battery capacity: 100A or larger
  • Number of blades: 3
  • Rotor diameter: 4.3 ft
  • Light weight: 31 lbs
  • INCLUDES:

    • 1 x Center piece (generator)
    • 1 x Tail piece
    • 1 x Digital MPPT Charge Controller
    • 3 x Blades
    • 1 x Nose cone
    • 1 x Manual brake switch
    • Large Hex bolts
    • Small Hex bolts
    • Hex key
    • Nuts
    • Washers
    • Unilateral open wrench
    • Operational installation manual

    WARRANTY: 1 Year manufactures warranty.
    ✅ FEATURES: Integrated automatic braking system to offer protection to from Surprising and top wind speed. Simple DIY installation strategies with all materials equipped. Can be utilized at the side of solar panels. MPPT Most power point tracking built into the wind turbine generator. Made with top quality Polypropylene and Glass Fiber subject matter with a weather resistant seal.
    ✅ PROTECTION AGAINST: UV protection coating, Surprising voltage surge and wind gust, top wind speeds with integrated automatic braking system + manual braking switch and over charging of battery.
    ✅ SPECIFICATION: Rated power: 600W, Rated speed: 31 MPH, Voltage system: 12V & 24V auto-detect, Cut-in wind speed: 4.5 MPH, Urged battery capacity: 100A or larger, Collection of blades: 3, Rotor diameter: 4.3 ft and Weight: 26 lb.
    ✅ INCLUDES: 1 x Center piece + including generator, 1 x Tail Piece, 1 x Digital MPPT Charge Controller, 3 x Blades, 1 x Nose cone, 1 x Manual brak switch, Hex Screws, Locking nuts, Spacers, Hex keys and 1 x Operational installation
    ✅ WARRANTY: 1 Year manufactures warranty.

Reviews

There are no reviews yet.

Be the first to review “WINDMILL 600W (12V / 24V) (50A / 25A) Wind Turbine Generator kit. MPPT charge controller included (Amp, Volt & Watt display) + automatic and manual braking system. DIY installation.”

Your email address will not be published. Required fields are marked *