Proxxon 37040 DH 40 MICRO Planer

Dust protected on/off switch
Restart protection in case of power interruption
110 – 120V AC, 60Hz,150 watt equals 6000 rpm

Best possible for fine planing work on soft and tough picket. A very good machine for fine planing work with a specifically smooth finish for hardwood and softwood work pieces. Best possible size unit for a wide variety of applications, where precision to a fragment of a millimeter is wanted. The unit’s load bearing components are all made from die-cast aluminum, with milled seats for bearings and spindles, being crucial for vibration-free, smooth and clean planing, making sure maximum stability. The triple spindled table is milled to near tolerances and can also be conveniently adjusted to 0.1 mm (0.004″) by a big zero adjustable hand wheel on most sensible of the housing. The cutter shaft has two HSS reversible cutters for a specifically long service life. Replacement of the cutters is facilitated by way of a generously sized service flap. The planer has an automated feed unit. The work piece due to this fact is handiest pushed by hand into the feed slot for a brief distance. A knurled and spring-loaded roller then draws the work piece in, thus enabling even irregularly shaped pieces of picket to be planed. After passing the cutter shaft the piece of picket is pushed out on the rear by a rubber-coated roller to offer protection to the outside of the work piece. The unit has a mud-safe on/off switch with restart protection in case of power supply interruption. Replacement Cutters Constituted of HSS, 82 mm long. Technical Data: 115 V, 60 Hz, 115 hp (150 W), 6,000 rpm. Feed speed: 4.8 m/min, Max. pass-through height: 40 mm (1 37/64″), Max. pass-through width: 80 mm (3 9/64″), Length of planing table: 232 mm (9 1/8″), Planing cutter length: 82 mm (3 7/32″), Chip decrease: as much as 0.8 mm (1/32″), Overall size: 280 x 230 x 235 mm (11 x 9 x 9 1/8″), Weight: approx. 8.0 kg (17.6 lb), Double insulated Note: For better making plans results, take just a little off your timber at a time. All new tools include a 2 year f
Dust safe on/off switch
Restart protection in case of power interruption
110 – 120V AC, 60Hz,150 watt equals 6000 rpm


















There are no reviews yet.

Be the first to review “Proxxon 37040 DH 40 MICRO Planer”

Your email address will not be published. Required fields are marked *