M-D Building Products 92296 SmartTool 47-1/4-Inch Digital Electronic Level

Angle accuracy to 1/10 of a degree
Mode button lets you see angles in 3 ways – degrees, percent slope, or pitch
Audible tone allows for hands-free operation

SKU: 2720-4791 Category:

Welcome to the versatile world of SmartTool. Most levels only come up with information at level (0 degrees) and plumb (90 degrees) the use of bubbles it’s important to work to center visually between two lines.  You can do that with SmartTool, too, but the SmartTool also permits you to measure digitally, electronically, and with an actual number, at every angle, all 360 degrees of a whole circle.  So installing a deck, stair rail, extending a roof or determining how much an old floor has sagged is simpler, less time consuming, and more accurate.

SmartTool is simple to use. Just press the on/off button and SmartTool will show you the angle of any surface with decimal-point accuracy.  The display even flips over with the level so SmartTool all the time reads right side up And it shuts off automatically after 6 minutes when it isn’t being used, all this from a standard, 9-volt battery. And, SmartTool can take abuse other levels can’t, because its components are made of high strength materials and You’ll be able to reset it to factory accuracy with the touch of a button.

Many versatile options
If You’ll be able to believe times you’d like to have both a small digital torpedo level and a longer level, the SmartTool Module fills the need.  The SmartTool Module can be utilized as a stand alone level or it may be placed in the optional American I-beam level in lengths of 24 inches, 48 inches or 96 inches. M-D’s top-quality red aluminum I-beam levels have been assured of excellence among construction professionals for more than three-quarters of a century. Easily attached or removed the use of only a screwdriver or coin, the versatility of this product can also be appreciated in almost any application. The simple, SmartTool patented field calibration procedure can also be performed the use of one button, any slightly level surface, and just a few minutes. When used with the optional magnetic bracket, the SmartTool Module will stay on saw blades, metal pipes, buildings, machinery or anything made of iron or steel allowing hands free measurement.

Simple to use
SmartTool means that you can find level and plumb in two ways.  For quick references, use the sensitive bubble vials. For highly precise work, use the digital display on the Sensor Module.  It provides accuracy to 1/10 of a degree. But the real benefit of the SmartTool is that it also reads the entire other angles bubble vials don’t.  So when you don’t seem to be dealing with level or plumb, SmartTool quickly tells what the angle is and what the angle must be.  And only SmartTool means that you can measure angles three different ways: degrees, percent slope, and pitch (rise over run).

Read in Degrees
Set saw blade angles to a fraction of degree accuracy with SmartTool.  Assure there is not any gap when you sign up for 2 cuts in conjunction with .1 degree accuracy. You’ll be able to easily duplicate a stair angle for setting handrails and never again will you be measuring top and bottom to ensure stair treads and rails are parallel.

Percent Slope and Pitch
In the percent slope mode the SmartTool means that you can read angles to meet requirements for sewer connections, ADA ramps, and grading. And showing compliance is merely a matter of pointing to the display. SmartTool also will give you roof pitch readings — in inches of rise per foot of run — right on the display. No two-handed measurements, no conversion calculations, and no mistakes.

Listen and Level Audio Feature
Have tasks where you truly can’t see the SmartTool but need instant feedback?  Then turn on the audio beeper.  When turned on with a single button, SmartTool permits you to hear when your task is at level or plumb.  This can also be great when shimming projects, leveling buildings, pool tables or other projects where you wish to have immediate feedback but don’t seem to be ready to see the display. This can leave your hands free to adjust, nail, or screw the project in place when you hear the beep telling you it is where you need it.

The hold button makes it easy to measure in areas where the digital display isn’t visible.  Take the measurement, push the hold button, and then bring the SmartTool in front of you to see your reading.

Angle accuracy to 1/10 of a degree
Mode button permits you to see angles in 3 ways – degrees, percent slope, or pitch
Audible tone allows for hands-free operation
Runs off of a standard 9-volt battery
Automatic shut-off after 5 minutes























There are no reviews yet.

Be the first to review “M-D Building Products 92296 SmartTool 47-1/4-Inch Digital Electronic Level”

Your email address will not be published. Required fields are marked *