Upgrade your house with Liner’s high tech Z-Wave automation products – we’re making way of life technology simple to put in and use! The Linear WD500Z Z-Wave Wall Dimmer Switch is stressed instead of a traditional overhead lighting wall switch or dimmer and allows wireless Z-Wave remote ON/OFF Regulate of the lights the usage of a remote, wall controller, or smart phone or tablet. The dimmer switch sports a small blue LED indicator lamp that shines when the switch is on, on the other hand it may be easily programmed to light up when the switch is off if desired, to lend a hand locate the switch at midnight. Shipped with a white paddle and decorative plate, the paddle and plate are easily changed to brown, black, almond or ivory with a replaceable trim ring kit (not included). The switch is compatible with permanently-installed incandescent, fluorescent, compact fluorescent, halogen and LED lighting, with a capacity of As much as 500 watts. Liner’s WD500Z dimmer switch may also be included in a programmed lighting ‘scene’, such that a couple of Z-Wave-connected lights or electrical items may also be turned on or off with a single click of your controller or remote device. All Linear Z-Wave products are compatible with certified Z-Wave controllers, allowing integration with a lot of options in home automation systems. Linear is the sector’s largest consumer of Z-Wave chips for smart devices and we have been successfully building wireless electronics for over 53 years – so you realize that we take quality seriously. Z-Wave controllers – I. e. hubs/gateways/remotes are sold one by one. Maximum Load: 500 Watts(For Regulate of permanently installed lighting fixtures only – NOT for Regulate of receptacles) Signal (Frequency): 908. 42 MHz Range: As much as 100 feet between the wireless controller and/or the nearest Z-Wave device Input: 120v 15A 60Hz Z-Wave Version 4. 55 Network Inclusion Scene Command Class Security Compatible Requires a Neutral Replaceable Trim Ring Design.The product may have wires which might be pre-cut for simple stripping.
- The WD500Z-1 dimmer switch can only be installed in homes that experience neutral wiring
- · Nortek Security & Regulate strongly recommends that the installation of the WD500Z-1 dimmer switch be performed by an experienced electrician.
- · Incorrect or wrong wiring of the WD500Z-1 dimmer switch can cause irreparable damage to the switches circuitry.
Wireless Z-wave Wall Dimmer Switch
Z-wave & Manual Regulate For Connected Lights
500w (4a) Max Load
Fits In Standard J-box
White. Z-Wave smart chips enable two-way RF communication among hundreds of Z-Wave-enabled devices the usage of the Z-Wave international wireless standard.
Uses Z-Wave’s Scene Command Class
Easily replace existing standard switch so as to add a Z-Wave controlled lighting dimmer. Compatible with any Z-Wave certified gateway
Linear Z-Wave products provide As much as 100 feet range between the wireless controller and/or the nearest Z-Wave device
Linear has been providing highest-in-class home & business Regulate solutions for over 50-years and is a leading around the world mfg.. of Z-Wave products
Compatible with incandescent and such a lot dimmable fluorescent, halogen, Xenon and LED fixtures and The wires are pre-cut for simple stripping.