JET 708524 JPM-13CS 13-Inch 1-1/2-Horsepower Planer/Molder, 110/230-Volt 1-Phase

Sturdy cast-iron table
Reduced vibration
Adjustable infeed/outfeed

Boasting a 1-1/2-horsepower motor, the Jet 708524 JPM-13CS planer/molder produces an excellent finish with its three-cutter head design and can maintain material as much as 13 inches wide and as much as 6 inches in height. A sturdy cast-iron table and base provide strength and reduce vibration all through use, and built-in lockable casters add reinforce and stability whilst allowing easy maneuverability.

Jet 708524

Designed and built with the house woodworking shop in mind (view larger).

At a Glance

708524 JPM-13CS
13-Inch Planer/Molder
At a Glance:

  • Totally enclosed fan-cooled 1-1/2-horsepower motor
  • Three-cutter head design produces an excellent finish
  • Molding cutter head comprises more than 40 standard molding cutter sets
  • Adjustable, rubber-coated infeed and outfeed rollers would possibly not mar wood
  • Top-mounted height adjustment handle
  • Five-year limited warranty
At a Glance

Power Base for Home Woodworking

Designed and built with the house woodworking shop in mind, the Jet 708524 JPM-13CS has a totally enclosed 1-1/2-horsepower, 115-volt motor that may easily be rewired to 230 volts. The motor delivers its power to the cutterhead assembly through a pair of V-belts running in precision-machined multi-groove pulleys. A removable side door at the cabinet provides get entry to to the motor and its belt-tensioning mount will have to adjustment change into important sooner or later.

Superior Cutting and Feeding

The JPM-13CS features an all-steel, precision-machined cutterhead (2-9/16-inch diameter) fitted with three full-width knives. The knives are retained by three-piece wedge-shaped gibs that allow for the installation of many molding-knife profiles without taking out the planer blades. The center gib section makes installing most molding knives easy (2 inches wide and under).

The planer/molder has two feed rates, with the high 20 FPM (feet per minute) setting used primarily for dimensioning wood when plenty of material is being got rid of quickly. The 10 FPM speed is used for finish cuts when the smoothest imaginable surface is desired, and this slower feed rate may be used for molding operations.

Rubber-covered infeed and outfeed rollers keep the stock moving at a consistent pace, and the rubber feed roller surface gets a good grip at the wood without marring the profiled surface of molded wood. Either one of the feed rollers are easily adjustable to deal with their performance.

Generously Sized, High-Quality Table

The cast-iron table lends various heft and contact surface, measuring 19-1/4 inches long by 14 inches wide. The table has 6 inches of trip maintained by lead screws on either side and is driven by a very simple-to-use hand crank on top of the machine. Handy metric and inch scales flank the infeed housing opening to make adjusting cut depth simple and accurate. It comes with an incorporated dust chute–so It is simple to hook as much as a dust collector and keep the shop clean. Four lockable casters (not standard) make it easy to move the tool in a tight shop. It is backed by a five-year limited warranty.

5-year warranty

What’s within the Box

One Jet 708524 JPM-13CS planer/molder, and operating and assembly instructions.


  • Motor: 1-1/2 horsepower, 1 phase, 115/230 volt
  • Maximum planing width: 13 inches
  • Maximum planing thickness: 6-1/8 inches
  • Maximum planing length: 14 inches
  • Cutterhead: 4,500 rpm speed, 2-9/16-inch diameter
  • Cuts per minute: 13,500
  • Feed rate: 20 feet per minute (FPM) planing; 10 FPM molding
  • Dimensions: 24 inches by 25 inches by 41 inches
  • Weight: 258 pounds
  • Warranty: 5-year, limited

Sturdy cast-iron table
Reduced vibration
Adjustable infeed/outfeed
Motor positioned at base
Comes with stand

















There are no reviews yet.

Be the first to review “JET 708524 JPM-13CS 13-Inch 1-1/2-Horsepower Planer/Molder, 110/230-Volt 1-Phase”

Your email address will not be published. Required fields are marked *