Halo H5RT 5″ Line Voltage Remodel NonIC Recessed Housing is thermally secure and designed To be used in noninsulated ceilings. The Halo H5RT 5″ Line Voltage Remodel NonIC Recessed Housing can be utilized in insulated ceilings however the insulation should be kept no less than three inches from each side of the housing. The Halo H5RT 5″ Line Voltage Remodel NonIC Recessed Housing snaps into the trim to keep the location of the lamp consistent. The Halo H5RT 5″ Line Voltage Remodel NonIC Recessed Housing has the Halo name embossed on plaster from galvanized steel construction.Note: Can be used in insulated ceilings but insulation MUST be kept 3″ from each side of housing.To be used with 5 Inch Recessed lighting fixtures Trims
The H5RT is a brilliant choice if you are In search of a vivid yet low-profile lighting fixtures solution for installation in non-insulated existing construction. The five-inch aperture contains the smaller PAR20 and PAR30 halogens and fits numerous trims, allowing you to customise the look and lighting fixtures effect.
Halo makes installation simple with an array of useful features. The H5RT can also be installed from below the ceiling the use of the included remodel clips (these accommodate 1/2- and 5/8-inch ceiling materials). The fixed-position porcelain socket with screw shell provides consistent lamp positioning, and three “Quick Connect” connectors get rid of the will for separate wire nuts.
While this unit isn’t IC-rated, you’ll be able to install with insulation so long as you keep it no less than three inches from the housing. For safety, the fixture features a self-resetting thermal protector that deactivates the fixture if it overheats.
Available with numerous trim options (sold one at a time). UL damp-location and feed-through rated; CSA certified; IP rated. (In search of a an identical lamp for brand new construction? See Halo’s H5T.)–Josh Dettweiler
What’s within the Box
Non-IC-rated 5-inch-aperture recessed downlighting housing
To be used in existing construction with non-insulated ceilings
UL/cUL listed for damp location and feed through
Die-stamped 22-gauge CRS, white powder-coat finish
1-year warranty; requires 1 120-volt PAR20 or PAR30 lamp (no longer included)