Gould’s GT15 Self-Priming Design Once pump is to start with primed, stuffed with water, it’s going to reprise when the water level rises above the tip of the suction pipe. Back pullout design permits disassembly of pump for service with out disturbing piping. Two compartment motor for simple get right of entry to to motor wiring and replaceable elements. The Bolt down diffuser supplies certain alignment with impeller. Diffuser has stainless wear ring for extended performance in abrasive stipulations. F.D.A. compliant, injection molded, food grade, glass filled Lexan for sturdiness and abrasion resistance. Impeller: F.D.A. compliant, glass filled Noryl. Corrosion and abrasion resistant. Corrosion Resistant: Electro-coat paint process is applied inside and outside, then baked on. Casing: Cast-iron construction. Four (4) bolt, back pull-out design. Tapped openings equipped for vacuum gauge and casing drain. Powered for Continuous Operation: Pump ratings are throughout the motor manufacturer’s really helpful working limits. Can also be operated incessantly with out damage. Mechanical Seal: Carbon/ceramic faces, BUNA elastomers. 300 series Chrome steel metal portions. Pump design prevents the seal from running dry. APPLICATIONS: In particular designed for the next uses: Lawn sprinkling • Irrigation • Air con systems • Warmth pumps • Water transfer • Dewatering GENERAL GT SERIES SPECIFICATIONS Pump: • Pipe connections: 1½” NPT suction 1½” NPT discharge • Capacities: to 110 GPM at 5 foot suction lift • Heads: to 128 feet • Reprise capabilities: to 25 feet suction lift • Most working pressure: 125 PSIG • Most water temperature: 140° F (60° C) • Rotation: clockwise when viewed from motor end. Motor: • NEMA same old open drip proof • 60 Hz, 3500 RPM • Chrome steel shaft • Single section: ¾-1½ HP, 115/230 V; 2 and 3 HP, 230 V handiest. Built-in overload with automatic reset.
FDA Compliant Impeller
Powered for Continuous Operation