The Fluke 50 Series II digital thermocouple thermometer is used for applications requiring a broad range of temperatures, including furnaces, kilns, freezers, and other industrial applications. This thermometer measures temperatures in Celsius, Fahrenheit, or Kelvin by the use of a Type K, Type J, Type T, or Type E thermocouple probe. It comes with one or two Type K bead thermocouple probes with 40″ cables that measure from -40 to 260 degrees C (-40 to 500 degrees F). This thermometer provides the relative time of minimum, maximum, and average temperature measurements for monitoring. It has an offset serve as that permits the operator to make amends for thermocouple errors and increase accuracy. The thermometer body protects against splashing water and dust, and it is available in a holster that absorbs have an effect on to assist give protection to against damage if dropped. The thermometer enters sleep mode after 20 minutes of inactiveness to assist preserve battery life. It conforms to NIST standards for compliance with regulations. The European Conformity (CE) marking indicates compliance with applicable European Union (EU) directives, and CSA mark indicates compliance with applicable Canadian Standards Association directives. This thermometer is suitable for measuring the temperature of apparatus, systems, and processes in industrial and manufacturing environments.
|Type K temperature range||-two hundred to +1372 degrees C (-328 to +2501 degrees F)|
|Type J temperature range||-210 to +1200 degrees C (-346 to +2192 degrees F)|
|Type T temperature range||-250 to +400 degrees C (-418 to +752 degrees F)|
|Type E temperature range||-150 to +1000 degrees C (-238 to +1832 degrees F)|
|Temperature accuracy above -one hundred degrees C||+ or – 0.05% + 0.3 degrees C|
|Temperature accuracy below -one hundred degrees C||Type K, J, and E: + or – 0.20% + 0.3 degrees C; Type T: + or – 0.50% + 0.3 degrees C|
|Display resolution||0.1 degrees C / degrees F / K < 1000 degrees; 1.0 degrees C / degrees F / K > or = 1000 degrees|
|Power Supply||(3) AA Batteries|
|Dimensions||173 x 86 x 38mm (H x W x D)|
H is height, the vertical distance from the lowest to best point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.
Digital thermocouple thermometers measure the temperature of air, liquids, or surfaces. They will measure temperature in Celsius, Fahrenheit, or both. Thermocouple thermometers are composed of two conductors of different metals, frequently alloys of the similar metal, which touch on the sensor end of the thermometer. The variation in conductivity between the 2 metal pieces produces a voltage go with the flow between the sensor end and the open end of each and every conductor, which can be utilized to resolve the temperature. Different alloys are used for different temperature ranges. Thermocouple thermometers are utilized in applications that require a big temperature range and don’t require a high degree of accuracy. These thermometers are utilized in kilns, turbine exhaust systems, and furnaces.
Fluke Corporation manufactures electrical testing tools and software for industrial and commercial applications. The corporate, founded in 1948, is headquartered in Everett, WA.
What’s within the Box?
- Fluke 50 Series II digital thermocouple thermometer
- (1) or (2) 80 PK-1 Type K thermocouples
Thermocouple thermometer to be used in applications requiring a broad range of temperatures, including furnaces, kilns, freezers, and other industrial applications
Measures temperatures in Celsius, Fahrenheit, or Kelvin by the use of a Type K, Type J, Type T, or Type E thermocouple probe
Features a Type K bead thermocouple probe with a 40″ cable that measures from -40 to +260 degrees C (-40 to +500 degrees F)
Provides the relative time of minimum, maximum, and average temperature measurements for monitoring
Conforms to NIST standards for compliance with regulations