Sale!

Enerwave ZW20RM wireless Z-wave in-wall smart meter energy monitor TR Duplex Receptacle,120VAC, 20Amp, NEUTRAL WIRING REQUIRED, White

The ZW20RM is a Z-Wave Enabled/Controlled Switch Which Replaces Your Existing Standard Wall Switch to Enable Wireless On/Off Control to the Connected Load via Your Z-Wave Gateway. The Smart Meter Feature Allows You to Monitor Energy Usage from the Connected Load. (Monitoring not supported by Wink Hub)
This Home Automated Smart Switch Allows for Manual and Remote Control from any Smart Phone, Tablet, PC or Mac or any Internet Connected Device. This Module is Fully Interoperable with Other Z-Wave Enabled Devices and can be Easily Added into your Z-Wave Network.
The ON / OFF Control of the Connected Load can be Programmed into Z-Wave Scenes, with Dynamic Scheduling and Events from Anywhere

ENERWAVE Z-Wave products make your own home a smart home with great convenience in remote Keep an eye on on home appliances/scene/events, enhanced security and improved energy efficiency when they’re connected with a z-wave certified hub/gateway. You’ll easily monitor the ammount of power used with the smart meter function of the ZW20RM at the side of controling the ON/OFF, dimming, sensor on lights, fans, humidity, heater, air-condition, TVs and other electronic so much and appliances in your whole home on any of your smart phones, ipad, tablet or desktop computer. ENERWAVE ZW20RM Z-Wave Duplex TR receptacle is designed to switch standard wall outlet, so You’ll Keep an eye on wirelessly or manually ON/OFF operations on table lamp, floor light, fan, TV, and other small electronic appliances with an iPhone, iPad, Samsung Galaxy, android, or desktop computer when you push the button to pair it on your z-wave hub such as smartthings gateway or other z-wave certified hubs in your house. No worries on forgetting to show off light, TV or Fan, since You’ll turn them off remotely. It isn’t just a simply ON/OFF Keep an eye on, but in addition You’ll add them to a customized scene/event group and Keep an eye on it at the side of other devices in the similar scene group for great convenience and smart Keep an eye on of your own home event and schedule. One outlet is z-wave controlled outlet with programmable functions of managing ON/OFF by scenes, association and schedule event. ZW20RM z-wave receptacle has a blue LED indicates the status of the controlled outlet and/or act as a night light for simple locating in darkness. The opposite outlet is at all times-on for flexibility to charge your devices. ENERWAVE outlet/receptacle products use Tamper Resistant design for more secured safety especially for kids. It’s required by 2011 NEC code for new build homes. This Z-wave TR Duplex Receptacle is fully 2011 NEC code compliant. Two wall plates included within the box, one in every of them being screwless wall plate.
The ZW20RM is a Z-Wave Enabled/Controlled Switch Which Replaces Your Existing Standard Wall Switch to Enable Wireless On/Off Keep an eye on to the Connected Load by way of Your Z-Wave Gateway. The Smart Meter Feature Allows You to Monitor Energy Usage from the Connected Load. (Monitoring not supported by Wink Hub)
This Home Automated Smart Switch Allows for Manual and Remote Keep an eye on from any Smart Phone, Tablet, PC or Mac or any Web Connected Device. This Module is Fully Interoperable with Other Z-Wave Enabled Devices and May also be Easily Added into your Z-Wave Network.
The ON / OFF Keep an eye on of the Connected Load May also be Programmed into Z-Wave Scenes, with Dynamic Scheduling and Events from Anywhere
This Device May also be Used for A Single Pole (Single Location Switch) Application or a 3-Way (Multi-Location) Application with the ZW3K Auxillary Switch (Sold One after the other).
**NEUTRAL WIRING REQUIRED** Voltage: 120VAC, 60HZ, Incandescent: 1000W, Ballast: 1200VA, Resistive: 1800W (20A), Motor: 1/2HP, Z-Wave Frequency: 908.42MHz, Operating Temperature: 32° – 104° F, Range: As much as 100ft Line of Sight Between the Wireless Controller or Closest Z-Wave Receiver Module, Compatible with Any Form of Lighting: Incandescent, Halogen, CFL, LED, Xenon, and the like…

Reviews

There are no reviews yet.

Be the first to review “Enerwave ZW20RM wireless Z-wave in-wall smart meter energy monitor TR Duplex Receptacle,120VAC, 20Amp, NEUTRAL WIRING REQUIRED, White”

Your email address will not be published. Required fields are marked *