Camco’s RV Gen-Turi Generator Exhaust Venting System is designed for close quarters at RV rallies and tailgate the parties that create a need for noise in addition to exhaust fume reduction. This Gen-turi diverts nasty fumes away from the ground, where they would possibly not be inhaled by neighboring RVers. It directs generator exhaust above the roof line whilst reducing noise and weighs only nine lbs. This system is easy to install and disconnects quickly.
The Camco Gen-turi RV Generator Exhaust System is a venting system designed specifically for RV generators that provides for fresher air around RVs in addition to reduces generator noise. The Gen-turi utilizes a tubing and coupling system to raise generator exhaust above the top level of your RV. It may be used with RVs utilizing virtually any exhaust pipes size by the use of a lot of adapters. Additional features include: light weight design, a rubberized stabilizing/sound reduction system and a storage bag.
Reduce RV Generator Exhaust and Noise
RV generators are a well-liked and convenient tool for providing instant power when you on the road, but close quarters at rallies, tailgate parties and at campgrounds create a need for a reduction in the noise and exhaust fumes that they generate. This is where Gen-turi comes in. The Gen-turi is made specifically to be used with RV generators,* when the vehicle is at rest. It diverts nasty fumes away from the ground, where they may be able to be inhaled by neighboring RVers and campers, allowing you your entire comforts whilst remaining a good neighbor. As generator exhaust is vented above the roof line of the RV and could also be air cooled in a patented process.
Dilution of fumes results in less rattle that may be steadily transferred to the vehicle body, and then the surrounding area, resulting in reducing noise all around. The Gen-turi could also be conveniently light weight at only nine pounds, and comes with its own soft storage bag.
How it Works
Exhaust “noise” comes from two sources: vibration and the sound made by the actual gases leaving the exhaust pipe. Most manufacturers mount generators in a manner that uses some type of rubber material to isolate the vibration of the generator. Although the Gen-turi is rigidly secured to the exhaust system, rubber straps are used to stabilize the Gen-turi to the coach. This prevents transferring the vibration noise of the generator system to the coach. As an added benefit, the noise made by the gases discharging from the generator exhaust pipe is diverted upward, above the roof line of the coach. Because of this, in most installations, the exhaust system is in reality quieter with the Gen-turi installed.
The Camco Gen-turi Air Cooled Generator Exhaust System is designed for near universal compatibility. With that in mind, It may be used with any recreational vehicle that utilizes an exhaust pipe with an outdoor diameter of 1″, 1¼”, 1⅜”, 1½”, 1⅝”, 1¾”, and 2″. Adapters required for 1¼”, 1⅜”, and 1½” are included. These will accommodate most installations. Adapters required for 1″, 1⅝”, 1¾”, and 2″ could also be purchased one by one.
It is suggested that the Genturi exhaust pipe extend 6″ above your RV’s roofline. Genturi has an overall length of 120″. Please measure your RV for compatibility.
- Vents RV generator exhaust up and away resulting in cleaner air for you and your neighbors
- Rubberized Gen-turi bungee and eye straps work together to limit vibration and reduce noise
- Minimal assembly required
- Dissembles quickly if you find yourself in a position to hit the road
- Wide range of adapters provided
- Provided storage bag means no lost parts
What’s in the Box
- 1 – top tube
- 1 – middle tube with coupling
- 1 – lower tube w/stainless steel elbow
- 1 – Gen-turi bungee with two S-hooks
- 1 – Gen-turi storage bag
- 2 – eye straps with 4 rivets and heavy-duty double-sided tape
- 1 – wire lock pin (D-Clip)
- 1 – 1½” muffler clamp
- 1 – 1½” mounting adapter
- 1 – 1¼” slotted bushing
- 1 – 1½” mounting adapter
- 1 – 1⅜” slotted bushing
About Camco Manufacturing
Camco began in 1966 with one employee and one product. Today, over 40 years later, we have more than 350 employees, over 3,000 products and five manufacturing facilities to better serve our customers’ needs. Our home office is in Greensboro, North Carolina. We also have locations in Elkhart, Indiana; Portland, Oregon; Leominster, Massachusetts and our newest facility in Beilun, China.
Competitive pricing, superior service, quality products and customer satisfaction are the foundations upon which Camco operates. Our friendly, knowledgeable customer service body of workers stands in a position to lend a hand our customers with any questions. At Camco, we take pride in meeting the ever changing demands of a challenging marketplace whilst serving you, our most valuable asset.
*The Gen-turi will have to not be used on generators not specifically designed for and used in an RV.
Diverts nasty fumes away from the ground and above the roofline, so they would possibly not be inhaled by neighboring RVers
Installs easily and disconnects quickly
Weighs only nine lbs
Reduces generator noise
Genturi has an overall length of 120″. 18″ extensions are to be had (Camco# 44872) for taller RV’s.