Bender LT-3000 Kit for Line Isolation Monitor (LIM) and Ground Fault Circuit Interrupter (GFCI)

Tests both LIMs and GFCIs
Operates on system voltages from 100 to 240 VAC
Large digital LCD display

NFPA 99 requires that line isolation monitor (LIM) and ground fault circuit interrupter (GFCI) tests be conducted at regular intervals. The LT3000 is a good and flexible trying out instrument for simply fufilling these necessities. The LT3000 plugs into any wall outlet as much as 240 V, 50 or 60 Hz. A easy pretest confirms the integrity of the isolated power system and to be sure that the system is correctly grounded. In the usual view, the LCD show presentations the system voltage. In LIM/GFCI trying out mode, adjust the present till it reads 2, 5 or 6 mA at the LCD show. Alternately pushing the L1 and L2 buttons confirms that the LIM / GFCI is working appropriately. When the LT3000 is plugged into the circuit, it is going to enter pretest mode. The show will indicate the system voltage, the “V” LCD will mild, and the “PRETEST” LCD (hazard current) will mild. If the L1 or L2 button is pushed, the system leakage on every line might be indicated in mA (milliamperes). Pushing the mode selector pushbutton will enter the device into compliance take a look at mode. The “LIM/GFCI” LED will mild. Press and hold the Set Current button and adjust the potentiometer current knob to the specified milliampere level. The worth will show at the LCD show. The Set Current button would possibly then be released. Pushing the L1 or L2 button will initiate a LIM take a look at. The chosen worth will show at the line isolation monitor.
Tests both LIMs and GFCIs
Operates on system voltages from 100 to 240 VAC
Huge digital LCD show
Overload protection with automatic reset
Light-weight (not up to 1 lb.)

Reviews

There are no reviews yet.

Be the first to review “Bender LT-3000 Kit for Line Isolation Monitor (LIM) and Ground Fault Circuit Interrupter (GFCI)”

Your email address will not be published. Required fields are marked *