6-pack E-simpo® Gx24q to E27/E26 Lamp Base Converter,15.5mm 4pin,g24 to E27/E26 Adapter, G24q to E27/E26, Lamp Holder Converter, Rohs Z1001

Need BYPASS OR REMOVE the ballast, otherwise, it doesn’t light on. G24q Series (Female Socket Fixture) to E26 (Male Bulb Base) Adapter – Q series has a shorter tip than D series and is more common in the US.
Suit for GX24q-1/GX24q-2/GX24q-3 socket,Physically change the contact, don’t change voltage. If you don’t know how to remove or don’t plan to ask an electrician to remove the ballast, please DO NOT BUY!
THE BALLAST IN YOUR FIXTURE MUST BE REMOVED OR BYPASSED FOR THESE ADAPTERS TO FUNCTION PROPERLY. CONSULT AN ELECTRICIAN IF YOU ARE UNSURE. DO NOT OPERATE A LED BULB WITH A BALLAST IN THE FIXTURE, DOING SO WILL LIKELY DAMAGE THE BULB.

6-pack Gx24q to E26 adapter, G24Q to E26/E27 GX24Q to E26, Lamp base converter, Rohs

6pcs/lot

15.5mm height at the tail

GX24Q-E26 lamp holder converter, compatible with GX24Q-1, GX24Q-2, GX24Q-3

Mostly welcomed in US and Japan.

Used for replace standard screw-based lamp into a pin-based socket

This lamp base converter don’t change any voltage or current. If there’s a ballast connected, dismantle ballast before install the LED light, differently the ballast will make resonance high voltage which destroy the light.
Note: It’s 100% that PL-C downlight fixture has ballast inside. Even you replace with CFL E26 E27, you also need dispose of the ballast, differently, the CFL lamp won’t work on.

Every piece are tested before ship. No chance screw out or defective. 100% guarantee work if you know the way to install it! we can not be responsible if the adapter or your lamp get burnt!
Please do not purchase if you have no idea how one can rewire or dispose of the Ballasts!!
In our commercial applications we’ve got found this adapter helpful, as the collection of E26 based LED bulbs is much larger than G24q based LED bulbs. Expand your Unfashionable-Fit Possibilities!
Reply to the comments:
1. The connections to the pin is a wire resting inside one of the most pins. It’s neither crimped nor soldered to the pin. Through the years this could lead to an open circuit.
E-Simpo Reply; Don’t Worry. The wire is fixed to the copper body by screw inside. Even time goes by, it’s going to not lead to open circuit. In any case,we do not plug and click it on a regular basis.
2. There are 4 pins, but these adapters only connect to 2 of them. In some cases the existing fixture uses the other 2 pins. In these cases, the adapters won’t work at all.
E-Simpo Reply: It need to be 2, not 4 with connection to electricity. Any 2 in cross corners with wire will do. This is correct for GX24Q Design, if 4 all with wire, it’s going to be short-circuit.
Need BYPASS OR REMOVE the ballast, differently, it doesn’t light on. G24q Series (Female Socket Fixture) to E26 (Male Bulb Base) Adapter – Q series has a shorter tip than D series and is more common in the USA.
Suit for GX24q-1/GX24q-2/GX24q-3 socket,Physically change the contact, don’t change voltage. If you do not know how to take away or don’t plan to ask an electrician to take away the ballast, please DO NOT BUY!
THE BALLAST IN YOUR FIXTURE MUST BE REMOVED OR BYPASSED FOR THESE ADAPTERS TO FUNCTION PROPERLY. CONSULT AN ELECTRICIAN IF YOU ARE UNSURE. DO NOT OPERATE A LED BULB WITH A BALLAST IN THE FIXTURE, DOING SO WILL LIKELY DAMAGE THE BULB.
All pin-based CFL, like GX24Q G24 GX23 G23 are lamp-ballast separated, but all screw-in E26 E27 are lamp-ballast integrated. ballast is a will have to to start a high voltage(600V-1500V 1ms) to remove darkness from the CFL, but It’s dangerous for LED Lamp. Because LED Lamp are built with LEDs and Driver which is transforming the 100-240V AC to DC for LEDs. So the LED Driver input will have to be 100V-240V or 85-265V, so 600-1500V will be too high, and easily destroy the led lamp.
There are some LED Driver who may also be compatible with the ballast, no LED Driver may also be compatible with the entire ballast. So the most efficient thing is bypass or dispose of once we need to change CFL to LED Lamp. When we dispose of pin-based CFL, we only got rid of the lamp, the ballast is still working in front fixture; even we change to E26/E27 CFL, there will be 2 ballasts, the light won’t work.

Reviews

There are no reviews yet.

Be the first to review “6-pack E-simpo® Gx24q to E27/E26 Lamp Base Converter,15.5mm 4pin,g24 to E27/E26 Adapter, G24q to E27/E26, Lamp Holder Converter, Rohs Z1001”

Your email address will not be published. Required fields are marked *